康滇古陆铅锌成矿带的划分及其找矿远景     

周信国  王邦松  郑朝光  赵支刚 《四川地质学报》1992,(3)

笔者在前人工作的基础上通过对康滇古陆铅锌矿成矿地质条件的分析,提出包括地轴西缘地区在内的整个康滇古陆可划分三个铅锌成矿带。习称的“东部铅锌成矿带”实为两个各具不同成矿特点的成矿带。论述了西部成矿带的存在。分别指出了三个带的找矿前景。  相似文献   

黔桂地区海西—印支阶段的构造古地理演化及沉积盆地的时空组合   总被引：1，自引：0，他引：1  

夏文臣  雷建喜  周杰  张年茂  王生维 《地球科学》1991,(5)

本文在详细研究各类沉积盆地的成因地层格架和鉴别古构造运动面性质的基础上,将黔桂地区的海西—印支构造阶段进而划分为3个构造古地理演化阶段:早海西(D—C_1)的前陆盆地演化阶段;中海西(C_2—P_1)的扬子陆块扩大和稳定沉降阶段;晚海西—早印支(P_2—T_2)的次生深海盆地形成和扩张阶段,从晚二叠世的半地堑式裂陷盆地系和基性火山活动的出现,到早、中三叠世次生深海盆地的发育,说明经历了长期镶嵌过程的扬子陆块再次被解体和开裂。  相似文献   

Structural style and evolution of the Gulf of Lion Oligo-Miocene rifting: role of the Pyrenean orogeny     

M. Sranne  A. Benedicto  P. Labaum  C. Truffert  G. Pascal 《Marine and Petroleum Geology》1995,12(8)

The Gulf of Lion margin results from the Cligo-Aquitanian rifting and Burdigalian crustal separation between continental Europe and Corsica-Sardinia. Immediately before the onset of extension, the area of the Gulf of Lion was affected by the Pyrenean orogeny which controlled the structural style of the evolving margin. During extension, the foreland of the Pyrenean orogen was affected by extensional thin-skinned tectonics. The décollement level ramped down into the basement, in areas where the latter was thickened during orogeny. In this intermediate part, the margin was extended by several crustal-scale low-angle faults, which generated small amounts of syn-rift sedimentation compared with the accumulation of post-rift sediments. However, more than 4 km of syn-rift sediments were deposited in the Camargue basin, which is located at the transition between thin- and thick-skinned extensional systems. Kinematic restorations and stratigraphy suggest a pre-rift surface elevation above sea-level of at least 1 km in the intermediate part of the margin, which is in agreement with reduced syn-rift sedimentation. The slope area extends seaward of the North Pyrenean Fault, a terrane boundary inherited from the Pyrenean collision. This part of the margin was stretched by seaward dipping low-angle block tilting of the upper crust, and antithetic lower crustal and sub-crustal detachment. The lithospheric structures inherited from the Pyrenean orogeny exerted a strong control on the kinematics of the rifting and on the distribution and history of subsidence. Such parameters need to be integrated in the definition of pre-rift initial conditions in future basin-modelling of the Gulf of Lion.  相似文献   

Structural patterns and tectonic history of the Bauer microplate, Eastern Tropical Pacific     

Barry W. Eakins  Peter F. Lonsdale 《Marine Geophysical Researches》2003,24(3-4):171-205

The Bauer microplate was an independent slab of oceanic lithosphere that from 17 Ma to 6 Ma grew from 1.4 × 10⁵ km² to 1.2 × 10⁶ km² between the rapidly diverging Pacific and Nazca plates. Growth was by accretion at the lengthening and overlapping axes of the (Bauer-Nazca) Galapagos Rise (GR) and the (Pacific-Bauer) East Pacific Rise (EPR). EPR and GR axial propagation to create and rapidly grow the counter-clockwise spinning microplate occurred in two phases: (1) 17–15Ma, when the EPR axis propagated north and the GR axis propagated south around a narrow (100- to 200-km-wide) core of older lithosphere; and (2) 8–6 Ma, when rapid northward propagation of the EPR axis resumed, overlapping ∼400 km of the fast-spreading Pacific-Nazca rise-crest and appending a large (200- to 400-km-wide) area of the west flank of that rise as a ‘northern annex’ to the microplate. Between 15 and 8 Ma the microplate grew principally by crustal accretion at the crest of its rises. The microplate was captured by the Nazca plate and the Galapagos Rise axis became extinct soon after 6 Ma, when the south end of the Pacific-Bauer EPR axis became aligned with the southern Pacific-Nazca EPR axis and its north end was linked by the Quebrada Transform to the northern Pacific-Nazca EPR axis. Incomplete multibeam bathymetry of the microplate margins, and of both flanks of the Pacific-Bauer and Bauer-Nazca Rises, together with archival magnetic and satellite altimetry data, clarifies the growth and (counter-clockwise) rotation of the microplate, and tests tectonic models derived from studies of the still active, much smaller, Easter and Juan Fernandez microplates. Our interpretations differ from model predictions in that Euler poles were not located on the microplate boundary, propagation in the 15–8 Ma phase of growth was not toward these poles, and microplate rotation rates were small (5°/m.y.) for much of its history, when long, bounding transform faults reduced coupling to Nazca plate motion. Some structures of the Bauer microplate boundary, such as deep rift valleys and a broad zone of thrust-faulted lithosphere, are, however, similar to those observed around the smaller, active microplates. Analysis of how the Bauer microplate was captured when coupling to the Pacific plate was reduced invites speculation on why risecrest microplates eventually lose their independence.  相似文献   

A tale of two synclines: Rifting,inversion and transpressional popouts at Lake Julius,northwestern Mt Isa terrane,Queensland     

G. S. Lister  M. G. O'Dea  I. Somaia 《Australian Journal of Earth Sciences》2013,60(2):233-250

This study reviews the origin of two approximately east‐west‐trending synclines in the Lake Julius area at the eastern edge of the Leichhardt Rift. The genesis of one of these structures can be found in a north‐south shortening event (D₁) that occurred at the beginning of the compressional Isan Orogeny (at ca 1600 Ma). Metasediments in a cross‐rift were rammed against a competent buttress defined by the pre‐existing rift architecture, producing the approximately east‐west‐trending Somaia Syncline and its associated axial‐plane slaty cleavage. In contrast, the Lake Julius Syncline was produced by reorientation of an originally approximately north‐south‐trending (D₂) fold, in a transpressional zone adjacent to a strike‐slip fault, at the end of the Isan orogeny. The effects of late fault movement can be partially reconstructed, based on correlations assuming that regionally developed trains of upright folds formed during the peak of the Isan Orogeny (D₂). These folds have been offset, as well as having been tightened and disrupted at the same time as fault movements took place. The overall pattern of movement in the Lake Julius region can be explained as the result of an ‘indentor’ ramming into the ancient edge of the Leichhardt Rift, which acted as a buttress.  相似文献   

南海北部珠江口盆地珠一坳陷西江凹陷与陆丰凹陷差异裂陷过程定量分析     

马兵山  漆家福  王俊怀  能源  于福生  陈玮常  邬光辉  葛家旺 《高校地质学报》2022,28(5):669-687

西江凹陷和陆丰凹陷均位于南海北部珠江口盆地珠一坳陷,前者盆地结构为两条NE向铲式边界断层控制的近对称地堑,后者表现为6条弯曲主干断层控制的“两洼夹一隆”构造格局。文章运用三维地震资料,在盆地结构、断裂系统描述的基础上,选取了两个凹陷共8条地震—地质剖面进行平衡剖面恢复,计算两幕裂陷阶段盆地伸展量、拆离深度等定量参数,并据此分析二者差异裂陷演化过程及与区域构造演化之间的联系。两个凹陷在新生代均经历裂陷一幕、二幕以及裂后拗陷阶段,其中每幕裂陷又可细分为早、晚两个亚幕。西江和陆丰凹陷的裂陷演化具有时空差异性。从裂陷一幕到二幕,二者伸展量都具有随时间减小的一般特征,其中西江凹陷的伸展量随时间持续减小,在裂陷二幕晚期仍具有较大伸展量,而陆丰凹陷在裂陷二幕早期伸展量略有升高,但在晚期伸展量急剧减小,其减弱程度远大于西江凹陷。两个凹陷的拆离深度都具有随时间逐渐加深的特征。在裂陷一幕早、晚亚幕,陆丰凹陷的拆离深度略大于西江凹陷。在裂陷二幕早、晚亚幕,西江凹陷的平均拆离深度由约8 km增长至9 km左右,而陆丰凹陷的平均拆离深度由约8 km跳跃式增长至约35 km。盆地的几何结构、断裂系统以及伸展量和拆离深度变化特征均反映陆丰凹陷在裂陷二幕晚期受热沉降作用或提前结束裂陷阶段,而西江凹陷在裂陷二幕之后结束裂陷作用。研究区的裂陷阶段自东向西逐渐结束可能受控于东北次海盆的扩张及南海的自东向西渐进式扩张。区域板块构造演化提供了珠江口盆地沿其轴向向SW方向伸展作用增强的差异伸展环境。该研究所揭示的盆地裂陷演化差异性对认识珠江口盆地的裂陷时限的时空分布和差异裂陷演化都具有重要的意义,也对认识南海北部大陆边缘裂陷过程提供重要的定量数据约束。  相似文献   

Middle Permian Mixed Siliciclastic-Carbonate System on the Northwestern Margin of the Indian Plate, Pakistan: Implications for Paleoclimate and Carbonate Platform Evolution     

Bilal WADOOD  Suleman KHAN  LI Hong 《《地质学报》英文版》2022,96(1):321-336

A mixed siliciclastic-carbonate system that responds to changes in Permian climate and subsequent carbonate platform evolution is investigated using microscopic details of the Middle Permian Amb Formation(Fm.),in Saiyiduwali section,Khisor Range,northern Pakistan.Thin sections were made from rocks throughout the stratigraphic section of the Amb Fm.and analyzed with an emphasis on carbonate and clastic microfacies,and the latter interpreted within the existing chronostratigraphic framework.Outcrop observations reveal that the units comprise coarse-grained,channelized,ripplemarked,and burrowed sandstone and sandy,fossiliferous limestone with minor marls and shale intercalations,suggesting deposition in a subaqueous tide-dominated delta to beach barrier.Based on the determined seven microfacies coupled with outcrop observation,the Amb Fm.was deposited in a tide-influenced subaqueous delta to middle shelf environment under fluctuating sea level.The deposition of compositionally mature sandstone in the lower part of the formation suggests reworking of detritus from the rift shoulders and an adjacent source area with an ambient warm and humid climate.The stratal mixing of carbonates and compositionally mature siliciclastic units in the middle part suggest deposition under tectonic and climate-induced terrigenous and carbonate fluxes to the basin.Thus the deposition shows a perfect transition from clastic-dominated deltaic to pure carbonate platform settings as a result of warm climate and tectonics.This Middle Permian warming is confirmed by sea-level rise and the presence of a temperature-sensitive fusulinid fauna in association with photozoan-based ooids.Deposition of the Amb Fm.and establishment of a carbonate platform are envisaged to be associated with major rifting of northern Gondwana,which subsequently resulted in the development of a rift basin at the passive margin of the NW Indian Plate then in northern Pakistan.  相似文献   

Metallogenic Age and Ore-forming Material Sources of the Dahongshan Fe-Cu Deposit, Yunnan Province: Insights from Molybdenite Re-Os Dating and H-O-S-Pb Isotopes     

YE Zifeng  YANG Guangshu  YU Wenxiu  CHEN Aibing  JIA Fuju 《《地质学报》英文版》2023,97(6):1698-1718

The Dahongshan Fe-Cu (-Au) deposit is a superlarge deposit in the Kangdian metallogenic belt, southwestern China, comprising approximately 458 Mt of Fe ores (40% Fe) and 1.35 Mt Cu. Two main types of Fe-Cu (-Au) mineralization are present in the Dahongshan deposit: (1) early submarine volcanic exhalation and sedimentary mineralization characterized by strata-bound fine-grained magnetite and banded Fe-Cu sulfide (pyrite and chalcopyrite) hosted in the Na-rich metavolcanic rocks; (2) late hydrothermal (-vein) type mineralization characterized by Fe-Cu sulfide veins in the hosted strata or massive coarse-grained magnetite orebodies controlled by faults. While previous studies have focused primarily on the early submarine volcanic and sedimentary mineralization of the deposit, data related to late hydrothermal mineralization is lacking. In order to establish the metallogenic age and ore-forming material source of the late hydrothermal (-vein) type mineralization, this paper reports the Re-Os dating of molybdenite from the late hydrothermal vein Fe-Cu orebody and H, O, S, and Pb isotopic compositions of the hydrothermal quartz-sulfide veins. The primary aim of this study was to establish the metallogenic age and ore-forming material source of the hydrothermal type orebody. Results show that the molybdenite separated from quartz-sulfide veins has a Re-Os isochron age of 831 ± 11 Ma, indicating that the Dahongshan Fe-Cu deposit experienced hydrothermal superimposed mineralization in Neoproterozoic. The molybdenite has a Re concentration of 99.7–382.4 ppm, indicating that the Re of the hydrothermal vein ores were primarily derived from the mantle. The δ34S values of sulfides from the hydrothermal ores are 2‰–8‰ showing multi-peak tower distribution, suggesting that S in the ore-forming period was primarily derived from magma and partially from calcareous sedimentary rock. Furthermore, the abundance of radioactive Pb increased significantly from ore-bearing strata to layered and hydrothermal vein ores, which may be related to the later hydrothermal transformation. The composition of H and O isotopes within the hydrothermal quartz indicates that the ore-forming fluid is a mixture of magmatic water and a small quantity of water. These results further indicate that the late hydrothermal orebodies were formed by the Neoproterozoic magmatic hydrothermal event, which might be related to the breakup of the Rodinia supercontinent. Mantle derived magmatic hydrothermal fluid extracted ore-forming materials from the metavolcanic rocks of Dahongshan Group and formed the hydrothermal (-vein) type Fe-Cu orebodies by filling and metasomatism.  相似文献   

琼东南盆地深水区主要构造因素与成盆机制分析-地震解释与物理模拟实验   总被引：2，自引：1，他引：1  

孙珍  王振峰  王章稳  孙志鹏  张伟  何丽娟 《海洋学报(英文版)》2015,34(4):32-40

Located at the northwest continental slope of the South China Sea, the Qiongdongnan Basin bears valley-shaped bathymetry deepening toward east. It is separated from the Yinggehai Basin through NW-trend...  相似文献   

云南德钦鲁春—红坡牛场上叠裂谷盆地演化   总被引：12，自引：0，他引：12  

王立全  李定谋  管士平  须同瑞 《矿物岩石》2001,21(3):81-89

鲁春－红坡牛场上叠裂谷盆地是在金沙江弧－陆碰撞之后的地壳伸展环境下形成,时间上发育于中三叠世晚期至晚三叠世,空间上叠置于江达－德钦－维西陆缘火山弧上。盆地中发育由浅水→深水→浅水的沉积组合序列和由玄武岩－－流纹岩组合成的“双峰式”火山岩系,岩石地球化学特征和Nd,Sr同位素结果表明玄武岩与流纹岩为同一岩浆源,从早期的基性岩浆演化为晚期的酸性岩浆。鲁春－红坡牛场上叠裂谷盆地的拉裂速度为0．43cm/a,扩宽距离为140km。中三叠世晚期至晚三叠世的上叠裂谷盆地已成为金沙江带中生代重要的赋矿盆地。  相似文献